How do i change my headlight bulb?

These are questions that get asked alot.
Please utilize this resource; it can save you lots of frustration.

Moderators: slug, tdah73

How do i change my headlight bulb?

Postby slug » Mon Oct 04, 2004 9:10 pm

Well, here it is.

first get yourself a good high-quality H4 halogen bulb.

WARNING: touching the glass envelope of the bulb may lead to premature bulb failure, including bursting. If in doubt as to whether you touched the bulb envelope, always use an alcohol wipe to clean it before placing the lamp in service

Next: reach in front of forks, and remove the plug for the headlight bulb. it's the only plug that is facing forwards, 3 wires

Remove the rubber boot. this may require some tugging.

From right side of bike, turn handlebars all the way right

Reach in and *gently* press the metal clip towards front, and up. rotate the clip towards the left side of the bike. GENTLY.

Image

this will release the bulb. extract old, broken, worn out, non-bright bulb. Discard per local disposal ordinances.

DO NOT REMOVE THE METAL CLIP

Insert new, clean, non-fingerprinted high quality H4 bulb in to the reflector assembly.

Rotate the clip back over the bulb. press the clip towards front, and down to lock it in place.

Replace the rubber boot. make sur eyou press it in tightly.

Plug the wire back in to the bulb. Voila!! all done :)
"I'd rather go riding than not." Ron "Cyclenerd"

Memorialize how they lived: Matt, Andrew, Joe, Kevin, Isaac, Kody, Ashwin

Take control back: http://www.fairtax.org/

"...you've got to create safety, not wait for it to naturally form around you." - Jopo16
User avatar
slug
Site Contributor
Site Contributor
 
Posts: 13278
Joined: Tue Mar 06, 2001 8:00 pm
Last Visit: Tue Jan 17, 2017 10:12 am
Location: Oak Ridge, TN
I Ride: 1998 YZF600r
Bike Color: Red/Black
Bike Mileage: 106,277

Return to The Most Common Questions

Who is online

Users browsing this forum: No registered users and 1 guest

cron